Out Let Blower

1. PURPOSE

It is established to provide a proper procedure for sucking power and hot air in the tablet manufacturing department.

2. SCOPE

It is applicable in Tablet & Infusion manufacturing department.

3. RESPONSIBILITY

Maintenance officer (Mechanical / Electrical)
Maintenance Supervisor (Mechanical / Electrical)

4. PROCEDURE

The Out let blower with instrument is handled in the following way.

5. MAINTENANCE

MONITORING OF MACHINE MAINTENANCE:

Time to time check each and every part of Out Let Blower according to the maintenance schedule.
Check the following parts carefully.
 Electric motor
 Electric Starter
 V Belt
 Pullies
This activity is then documented in the form Machinery & Equipment Maintenance Log
Check the Out Let Blower condition time to time to find any kind of problem during operation.
All the monitoring record is filed and kept by the Maintenance Supervisor.

EMERGENCY / BREAKDOWN MONITORING:

Maintenance Manager receives Maintenance Work Order duly signed by the section incharge of the concerned machinery or equipment.
Maintenance Work Order is assigned a number according to the receiving in the Maintenance Reference Register.
Maintenance Manager assigns the maintenance work to the concerned personal
After the completion of work the section incharge signs the completion of Work Order.
All the record is filed and kept by the Maintenance Supervisor.

PRECAUTIONS:

Before going to start always check the proper alignment of V belt and blower.
Check the internal side of the blower.