CAP SEALING MACHINE ( DYR POWDER & INJECTABLES )

1. PURPOSE

It is established to provide a proper procedure for Crimping of glass bottles (Dry Powder) on cap sealing machine.

2. SCOPE

It is applicable in Dry Powder and Injectables manufacturing department.
3. RESPONSIBILITY

Maintenance officer (Mechanical / Electrical)
Maintenance Supervisor (Mechanical / Electrical)

4 PROCEDURE

The Cap Sealing Machine with instrument is handled in the following way.

5 MAINTENANCE

MONITORING OF MACHINE MAINTENANCE:

Time to time check each and every part of Cap Sealing machine according to the maintenance schedule.
Check the following parts carefully.
 Electric motor
 Electric Starter
 Shoft, Bearing , Bushes, etc
 Spring
 V, Belt
This activity is then documented in the form Machinery & Equipment Maintenance Log
Check the Cap Sealing machine condition time to time to find any kind of problem during operation.
All the monitoring record is filed and kept by the Maintenance Supervisor.
EMERGENCY / BREAKDOWN MONITORING:

Maintenance Manager receives Maintenance Work Order duly signed by the section incharge of the concerned machinery or equipment.
Maintenance Work Order is assigned a number according to the receiving in the Maintenance Reference Register.
Maintenance Manager assigns the maintenance work to the concerned personal
After the completion of work the section incharge signs the completion of Work Order.
All the record is filed and kept by the Maintenance Supervisor.
PRECAUTIONS:
Always ensure that the sealing rollers are lubricated with light oil before starting the machine.
The machine should be handled by the trained operator.